Click To Call(904) 474-3568Click To Get A Free Estimate
Backyard paver patio with an outdoor dining set under a live oak in Jacksonville

Enjoy a patio that stays clean past the first rain

Patio Paver Sealing in Jacksonville, FL

Phone (904) 474-3568 and a local contractor will price the sealing of your Jacksonville back patio for free.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.75 to $3.25 a sq ft to clean, sand and seal
Call Now(904) 474-3568
Patios

Is there a contractor who seals patio pavers in Jacksonville?

A local contractor seals patio pavers all around Jacksonville, FL, and any request is answered within 1 business day, usually much sooner. Pricing is free and comes with no pressure to book. To speak with someone, call (904) 474-3568.

A Jacksonville back patio is where families eat, host friends and watch the weather roll in, so green film, faded color and weeds in the joints get noticed. Sealing brings the color back, keeps the sand where it belongs and lets the next rinse do more work. Tell the contractor what lives on your Jacksonville patio, then ask for your free estimate.

Call (904) 474-3568

Why choose us

Why does my shaded patio turn green so fast in Jacksonville?

Rain and shade on a Jacksonville patio

Moisture does it. Jacksonville gets about 52 inches of rain a year, Wikipedia says, and a patio under an oak or inside a screen enclosure may stay wet long after a storm. Safe Touch notes that growth does not freeze off in winter here, so shady lots keep mildewing from December through February. Show the contractor the dampest corner when you ask for your free estimate.

Soft wash before surface cleaning in Jacksonville

Pretreatment matters more than force. Jax Exterior Cleaning starts with a soft wash for mold, mildew and algae before surface cleaning, and Gravity Wave lists drying as its own step before sanding and sealing. A wet patio is never sealed. To plan around your yard, ring (904) 474-3568.

What stains show up on patios under Jacksonville oaks?

Tannin, rust and grease on a Jacksonville patio

Tannin is the common one. Safe Touch says live oaks leave brown stains that a surface cleaner evens out. Patio furniture adds rust rings, a grill leaves grease, and sprinklers add orange marks, and Safe Touch says oil needs chemistry while rust needs its own treatment and more pressure only makes it worse. Name your stains when you ask for your free estimate.

What may not come out in Jacksonville

Gravity Wave says oil, rust and organic stains may not come out completely. A fair contractor will say so up front. Not sure what made a mark? Ring (904) 474-3568 and describe it.

Fresh sand swept into the seams of a patio paver pattern beside a raised planter

How do pollen season and summer storms change a patio sealing date?

Pollen weeks and summer storms in Jacksonville

Both can spoil a coat. Jacksonville Today reported in March 2026 that pollen counts were at some of the year's highest and that pine is largely behind the yellow film on outdoor surfaces. Safe Touch says spring is the busiest season and summer storms wash sand from joints, with fall the preferred time to seal. Aim for the quiet window and ask for your free estimate.

Why a spare day helps in Jacksonville

Gravity Wave says sealer should go on only when weather and surface conditions allow proper drying, and Unilock asks for 24 hours of dry pavers before sealing. Book a spare day in case of rain. To ask about fall openings, call (904) 474-3568.

How are furniture, plants and sprinklers handled on patio day?

Furniture and plants at a Jacksonville patio

Gravity Wave names access among the things that set a price, and a Jacksonville patio is where access is tightest. Chairs, planters, a grill and a table all have to move, and plants beside the pavers need covering before cleaner goes down. Tell the contractor what is in the way when you ask for your free estimate.

Sprinklers and rust in Jacksonville

Sprinklers matter as much as furniture. Safe Touch says irrigation rust needs its own treatment and a rinse, so a head that sprays the patio edge should be switched off for the job and checked before the visit. To arrange the day, ring (904) 474-3568.

Does a patio beside the pool or a screen cage need special care?

Splash zones near a Jacksonville pool

Yes, because water is closer. Stallone's Pro Wash notes that pool deck pavers face constant moisture, and Safe Touch lists pool chlorine as one reason a coat wears down sooner than the usual interval. A patio that joins a pool deck sits in the same splash zone. Say so when you ask for your free estimate.

Heat on bare feet in Jacksonville

Heat is the other difference. Coastal Outdoor Construction says light-toned concrete pavers run cooler than dark ones and that travertine sheds heat, which matters for bare feet by a screen cage in July. Ask about color and sheen together, and call (904) 474-3568 with the layout.

What goes wrong when a patio is sealed too wet or too soon?

Why moisture ruins a Jacksonville coat

Moisture is the usual culprit. Safe Touch says sealing over dirt or wet pavers is how sealing jobs fail, and Unilock lists a whitish film as the result of trapping moisture, adding a second coat too soon or using too much product. A coat laid over a damp patio can cloud, and a cloudy patio is expensive to undo. To avoid that, ask for your free estimate.

Waiting on the Jacksonville weather

Gravity Wave says sealer goes on only when weather and surface conditions support proper application and drying. In Jacksonville that sometimes means moving a date by a day or two. Rather than rush, ask the contractor how a rain delay is handled, or phone (904) 474-3568.

How it works

What is the process for sealing my patio, from first look to final walk-through?

Six steps for a Jacksonville patio

Gravity Wave lists six steps: review, cleaning, drying and prep, joint sanding, sealer and care instructions. Here is how they play out on a patio. Ready for a date? Ring (904) 474-3568.

Review the Jacksonville patio

The contractor measures the area and notes stains, low spots, old sealer and plant beds.

Clean the pavers

Pretreatment goes on, then a surface cleaner near 1,500 PSI or less, as Western Interlock advises.

Dry and sand the joints

The surface dries, and fresh sand fills every seam.

Seal in a thin coat

A thin coat goes on by sprayer or roller and gets back rolled. Unilock says no more than two layers.

Care for the Jacksonville patio

You get care instructions and the time to keep furniture off while the coat cures.

Walk-through at the patio

The contractor and you look over the Jacksonville patio together before the visit ends.

Pricing

How much does it cost to seal a patio in Jacksonville?

What the published Jacksonville rates say

Safe Touch publishes $1.75 to $3.25 per square foot for a clean, sand and seal in Jacksonville, and stripping a failed coat costs more. Stallone's Pro Wash lists cleaning from $0.22 and sealing from $1.90. No page read for this site gives a patio-only rate, so the table builds one from those published pieces. For your own patio, ask for your free estimate.

Why Jacksonville patios take longer per foot

A patio takes longer per foot than an open drive because furniture, planters, steps and tight corners slow the work, and Gravity Wave names access among its price factors. Two bids that look alike should list the same steps. Want help reading one? Ring (904) 474-3568.

Jacksonville patio sizeTypical exampleCleaning only, fromSealing only, fromClean, sand and seal
200 sq ftSmall back patio$44$380$350 to $650
300 sq ftPatio with a seating area$66$570$525 to $975
400 sq ftLarge patio with a fire pit area$88$760$700 to $1,300

The third and fourth columns multiply the $0.22 and $1.90 per square foot starting rates Stallone's Pro Wash lists. The last column multiplies the $1.75 to $3.25 range Safe Touch published, read in November 2026. The sealing-only column assumes the patio is clean with full joints. A contractor sets the final price after a look at the Jacksonville patio.

Get a Free Estimate

What finish suits a patio where people walk barefoot?

Choosing a sheen for bare feet in Jacksonville

A calmer sheen is the safer choice around a pool or a screened lanai, and many Jacksonville patios take bare feet and wet leaves. Coastal Outdoor Construction says smooth high gloss sealers cause most of the slippery pool decks it is asked to fix. Stallone's Pro Wash lists wet look satin and natural matte next to high gloss. Tell the contractor about bare feet when you ask for your free estimate.

Choosing a color in Jacksonville

Color is the other half of the choice. Jax Exterior Cleaning says its two-part water-based sealer enhances color and gives a wet-look shine, while a matte finish stays near the unsealed tone. Compare both on a small patch and call (904) 474-3568 to set it up.

Should I seal a patio that is only a few months old?

Waiting on a new Jacksonville install

Wait first. Unilock says to hold off 60 to 90 days after an install, and that efflorescence, the white haze of natural salts, can take two to three months or up to a year to fade. A coat laid too early locks it in. If your Jacksonville patio is new, bring the install date when you ask for your free estimate.

How often should a Jacksonville patio be resealed?

Reseal timing for Jacksonville patios

Two to three years fits most Jacksonville patios, going by Safe Touch and Jax Exterior Cleaning, and Stallone's Pro Wash allows two to five. PaverGuard, a Jacksonville company, says open driveways wear sooner than shaded walkways, so a patio in full sun sits closer to the short end. A drop of water that soaks in rather than beading is the signal. Test a few spots, then ring (904) 474-3568.

Homeowner and contractor looking over a stained corner of a paver patio beside a grill
Photos

What do sealed patio pavers look like in Jacksonville?

Freshly sealed paver driveway at a two story home on a palm lined street on a Jacksonville patio
Sealed paver pool deck on a Jacksonville patio
Sealed paver patio with string lights behind a stucco home on a Jacksonville patio
Sealed paver walkway to a front door on a Jacksonville patio
Close view of freshly sealed pavers on a Jacksonville patio
Paver area with one cleaned half beside a dirty half on a Jacksonville patio
Contractor cleaning pavers on a Jacksonville patio
Contractor sealing or sanding pavers on a Jacksonville patio
Questions

What do Jacksonville homeowners ask about sealing a patio?

Is it good to seal pavers in Florida?

For a Jacksonville patio, usually yes. Humidity, shade and rain keep a patio damp, and Gravity Wave says Florida weather, moisture and sun can leave pavers dull or uneven and can move the joint sand. A coat helps keep that sand in place and makes algae easier to rinse away.

Do you seal pavers before or after polymeric sand?

After the sand. Unilock says to sweep it in, activate it and fill the joints to the right height, then let everything dry before sealing. Stallone's Pro Wash says a storm can wash sand out before it cures, so a Jacksonville patio job should not start with rain in the forecast.

How long do paver sealers last?

Safe Touch and Jax Exterior Cleaning both say two to three years, and Stallone's Pro Wash allows two to five in Northeast Florida. A shaded Jacksonville patio under oaks sits toward the longer end for wear, though it grows green faster and may be washed more often.

How much is sealant for pavers?

Stallone's Pro Wash lists sealing from $1.90 per square foot, and the full clean, sand and seal at Safe Touch runs $1.75 to $3.25. On a 300 square foot Jacksonville patio the full job comes to $525 to $975. Ask what a quote includes before comparing the numbers.

What does a patio paver sealing job cost in Jacksonville?

Safe Touch publishes $1.75 to $3.25 per square foot with washing and sand included. Gravity Wave says the price follows area, access, joint condition, existing coatings and finish. A Jacksonville patio with furniture to move and tight plant beds can price toward the high end.

Can brown stains from oak trees come out of Jacksonville patio pavers?

Often they can. Safe Touch says brown tannin stains from live oaks are evened out with a surface cleaner, and Gravity Wave cautions that organic, rust and oil marks may not fully come out. Ask for a test spot, and for what the contractor expects the result to be.

What keeps ants and weeds out of Jacksonville patio paver joints?

Full joints with fresh sand. Jax Exterior Cleaning says its silica sand hardens about as much as polymeric sand and keeps weeds and ants from settling in. Stallone's Pro Wash describes a weed-preventative joint system that locks the sand. Ask which sand your contractor uses.

What other paver work could a patio visit include?

A Jacksonville patio visit often covers the pool deck, the front walk or a stain on the drive. Every service has its own page. To add another area, ring (904) 474-3568.

Want your Jacksonville patio ready for the next cookout?

Use the short form or ring the number, and a reply lands within 1 business day, usually much sooner.

Call (904) 474-3568

Free, no obligation