Click To Call(904) 474-3568Click To Get A Free Estimate
Sealed brick paver driveway in front of a two story home on a palm lined Jacksonville street

Richer color and tight joints for Jacksonville pavers

Paver Sealing in Jacksonville, FL

Faded or green pavers? Contact Paver Sealing Jacksonville Florida today and ask for a free estimate on (904) 474-3568.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.75 to $3.25 a sq ft to clean, sand and seal
Call Now(904) 474-3568
Paver sealing

Can I get paver sealing in Jacksonville, and how soon?

A local contractor seals pavers across Jacksonville, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free, with no obligation to book. To get started, call (904) 474-3568.

What a clean, sand and seal does for Jacksonville pavers

Picture the driveway you pull into after a long summer of sun and storms: dull color, sand missing along the seams, green in the corners. A clean, sand and seal restores the color and packs each joint full once more. Afterward, a garden hose handles more of the upkeep. To have a contractor look at yours, ask for your free estimate.

Who answers when you ask about Jacksonville pavers

Your message goes to a local contractor who covers your part of Jacksonville, and the reply names the work, the sealer and a price. You can say no and nothing is owed. If a quick answer helps, ring (904) 474-3568.

Call (904) 474-3568

How it works

About this service

How to ask for a paver sealing price in Jacksonville

Getting a price takes a phone call or a short form. Share your street or ZIP and the paved area that needs work, and a contractor who covers your part of town follows up with a number. The form takes about a minute, so whenever you have one, ask for your free estimate.

Fewer voicemails when you hire around Jacksonville

Calling around alone tends to mean voicemails and callbacks that land during your workday. A single short request skips most of that. Prefer a voice? Ring (904) 474-3568.

What the Jacksonville paver guides on this site cover

The guides on this site answer what homeowners ask before they book. They cover what sealing costs around Jacksonville, how wet look and natural finishes differ, and how oak shade, afternoon storms and spring pollen change the plan. Already know what you need? Ask for your free estimate.

From first contact to a finished Jacksonville job

The path from first contact to finished job is short. You share your area and surface, a contractor visits to inspect the pavers and explain the sealer, and a price follows. Hiring is your decision, and (904) 474-3568 is open for questions along the way.

Why a calm sheen suits a Jacksonville pool deck

Coastal Outdoor Construction says most slippery pool decks it is called to fix are a sealer problem, and it warns against smooth high gloss products. Beside a pool, ask for satin or natural matte, and ask for your free estimate.

What a Jacksonville paver quote should list

Coastal Outdoor Construction, a Jacksonville contractor, says customers get a written, itemized price before work starts. Gravity Wave, another local company, names area, access, joint condition, existing coatings and finish as what sets a quote. Ask for each one in writing, and ask for your free estimate.

More about us
Family relaxing beside a screened pool with a freshly sealed paver deck under a clear Florida sky
Paver care

Our services

Jacksonville pavers usually need one of two jobs: a careful cleaning with fresh joint sand, or that same cleaning followed by a coat of sealer. Each has its own guide below. Torn between them? Ring (904) 474-3568.

Paver Sealing

Cleaning, new joint sand and a protective coat in a glossy wet look or a natural finish.

Paver Sealing details →

Paver Cleaning and Joint Sand

Algae and stain treatment, a gentle wash and fresh sand, done alone or ahead of sealing.

Paver Cleaning and Joint Sand details →

Why cleaning comes first on a Jacksonville driveway

Cleaning always comes first, because sealer grips whatever sits on the surface. Safe Touch, a Jacksonville washing company, says sealing over dirt or wet pavers is how jobs fail. Fresh sand goes in next, and the coat waits until the whole surface is dry. Curious which finish suits your home? Call (904) 474-3568.

What paver sealing costs per square foot in Jacksonville

Price follows size first and condition second. At the $1.75 to $3.25 per square foot Safe Touch publishes, a 300 square foot patio runs about $525 to $975 and a 600 square foot driveway about $1,050 to $1,950. Stripping a failed coat costs extra. To turn those ranges into a figure for your pavers, ask for your free estimate.

When Jacksonville pavers have to wait

Two conditions can reorder the work. Unilock, a paver maker, says to wait 60 to 90 days after an install so the white haze called efflorescence can clear. Pavers that rock underfoot need their base repaired before any coat goes down. Bring up either one when you phone (904) 474-3568.

Wash alone or wash and seal in Jacksonville

A wash brightens pavers today, and a coat decides how long they stay that way. Jax Exterior Cleaning, a Jacksonville company, says an unsealed surface breaks down until small white stones show and the sun fades the color. Safe Touch quotes a concrete driveway wash alone at $150 to $400. For a side by side figure on your pavers, ask for your free estimate.

Silica sand and weeds in Jacksonville joints

Jax Exterior Cleaning says its silica sand replaces ordinary joint sand and keeps weeds and ants out of the seams. Ask which sand a contractor plans to use, and ask for your free estimate.

Seven more paver guides for Jacksonville homes

Pool decks, driveways, brick, patios, travertine, restoration and stain removal each have a page of their own. Start with the guide for pool deck sealing, driveway sealing, brick sealing or patio sealing, or read about travertine, restoration and stain removal. Need help picking? Call (904) 474-3568.

View all services

Service area

Areas we serve

Where Jacksonville homes can ask for an estimate

Homes in every place listed below can ask for a free estimate, from the neighborhoods along the St. Johns River to the Atlantic side and into Clay and St. Johns counties. Each Jacksonville place has a page of its own with local notes. Not sure your street is covered? Ring (904) 474-3568.

The Jacksonville community

How Jacksonville grew to more than 500 neighborhoods

Jacksonville and Duval County merged on October 1, 1968, which is why a single city now holds more than 500 neighborhoods.

How many people live in Jacksonville

Wikipedia counts 949,611 people in the 2020 census, spread over more land than any other city in the contiguous United States. A driveway in one corner of town can face a different day than one across the river. To talk pavers at your address, call (904) 474-3568.

Rivers that run through Jacksonville

The St. Johns River runs through the city, and the Trout River, one of its tributaries, lies entirely inside it.

Marshes and shade near Jacksonville pavers

The Timucuan Ecological and Historic Preserve, in the northeast, protects salt marshes, coastal dunes and hardwood hammocks, and its 7 Creeks trail system runs more than 30 miles, according to the National Park Service. Pavers beside that much water and shade stay damp longer. To price yours, ask for your free estimate.

Rain and July heat on Jacksonville driveways

Weather decides when pavers wear. Jacksonville gets about 52 inches of rain a year, and July highs average near 92 degrees.

Hurricane years and Jacksonville joints

Hurricane Matthew in 2016 left about 250,000 people without power, and Hurricane Irma in 2017 set a flood record, so a look over the joints after a big storm is a good habit. Spot sand loss or standing water afterward? Ask for your free estimate.

Fall is the quiet season for Jacksonville sealing

Safe Touch says spring, March through May, is the busiest season, summer storms wash sand from joints, and October and November are the right time to seal. To ask about a fall date, call (904) 474-3568.

The wettest months for Jacksonville pavers

June and September are the wettest months, at about 7.6 inches of rain each, and the soil is mostly sand and clay, according to Wikipedia. Jax Exterior Cleaning says heavy Florida rain can wash out the base and joint sand under pavers. Check the edges after those months, and ask for your free estimate.

Older Jacksonville streets and their walks

Wikipedia says San Marco homes began going up in 1926 in the Mediterranean Revival style, and a building boom followed the 1901 fire downtown. Walks and drives around homes that old may be well past their install date, so levels and joints deserve a look. To book one, call (904) 474-3568.

Get a Free Estimate

See all service areas
Contractor holding a clipboard beside weedy brick paver joints while a homeowner looks on
Photos

What do sealed pavers look like around Jacksonville?

Freshly sealed paver driveway at a two story home on a palm lined street around Jacksonville
Sealed paver pool deck around Jacksonville
Sealed paver patio with string lights behind a stucco home around Jacksonville
Sealed paver walkway to a front door around Jacksonville
Close view of freshly sealed pavers around Jacksonville
Paver area with one cleaned half beside a dirty half around Jacksonville
Contractor cleaning pavers around Jacksonville
Contractor sealing or sanding pavers around Jacksonville
Free estimates

Why choose us

Why a Jacksonville search mixes washers, builders and sealers

Search for paver sealing in a city this size and the results mix pressure washers, hardscape builders and sealing specialists together. Sending one short request moves the sorting off your plate. To see how it plays out, call (904) 474-3568.

A water test you can run at a Jacksonville home

PaverGuard, a Jacksonville company, suggests dribbling water on the pavers in a few spots. If it vanishes at once, the protection is gone. Try it, then ask for your free estimate.

What to ask for before you hire in Jacksonville

Whoever you hire, the quote should name the sealer, list the joint sand and state the price in writing. The contractor standards page lays out questions worth asking first, from insurance to how a company handles a rainy forecast. Armed with the answers, you can compare bids more easily. For your first number, ask for your free estimate.

Contractors who cover Duval County

Jacksonville spreads over more land than any other city in the lower 48. A contractor who already works your side of town knows the shade, storms and sun your pavers get.

A free look and a free price

The visit and the estimate are free, with no obligation. If the number does not suit you, say no and move on.

Published rates to hold a bid against

Jacksonville companies post their per square foot rates, and this site lists the same ranges. A bid far above or below them is worth a question.

You pick the day

Take the price in writing and decide at your own pace. The contractor standards page lists what to ask before you sign.

Questions

What do Jacksonville homeowners ask about paver sealing?

Cost, coat life, HOA rules and timing come up most around Jacksonville. Short answers follow, and (904) 474-3568 is there for anything they miss.

Is it good to seal pavers in Florida?

Yes, once pavers have faded, lost joint sand or started to grow algae. Stallone's Pro Wash, a Jacksonville company, says strong sun can fade unsealed pavers within a few summers. A coat slows that fading and makes the surface easier to rinse. Ready to find out about yours? Ask for your free estimate.

What is the average cost to seal pavers in Florida?

Safe Touch, in Jacksonville, lists $1.75 to $3.25 for every square foot of a clean, sand and seal. At those rates a 600 square foot driveway lands between $1,050 and $1,950. Stripping a failed coat or refilling empty joints pushes the price up. Dial (904) 474-3568 for a number on your own pavers.

How long do paver sealers last?

Plan on two to five years. Stallone's Pro Wash gives that span for Northeast Florida, and Safe Touch calls two to three years typical. Open sun shortens the life of a coat, and shade stretches it. Want yours checked? Ring (904) 474-3568.

Why is paver sealing so expensive?

Mostly because of prep work, not the sealer itself. A job means washing, treating stains, refilling joints, waiting for dry pavers and only then laying the coat. Safe Touch says empty joints or a failed old coat turn it into a two day job. To see what a fair quote spells out, ask for your free estimate.

Do I need my HOA's approval to seal pavers in Jacksonville?

Check first if your home sits in an association. Many boards want a say over changes visible from the street, and a move from a natural finish to a glossy wet look is the kind they may question. Mention your finish choice when you ask for your free estimate.

What time of year suits paver sealing in Jacksonville?

Fall is the easiest. Safe Touch says spring, March through May, fills fast, while fall is the quiet window for a two day paver job around dry weather. Jacksonville Today also reported that pollen counts hit some of the year's highest levels in March 2026. Phone (904) 474-3568 to pick a date.

Do you seal pavers before or after polymeric sand?

After. Unilock says the sand is swept in, activated and brought to the right height before any sealer goes down, and the surface has to be dry. A coat laid over loose sand traps it. Ask for the order of work in writing when you ask for your free estimate.

Is it better to spray or roll paver sealer?

Either works when the coat goes on thin. Unilock says to use a low pressure sprayer or a roller, then back roll to even out the film. How thin and even the coat lands matters more than the tool. Ring (904) 474-3568 to ask what a contractor would use.

How much is sealant for pavers?

Most of the bill is labor and prep, not sealer. Stallone's Pro Wash lists sealing from $1.90 per square foot, and a full clean, sand and seal runs $1.75 to $3.25 at Safe Touch. Ask what each quote includes before you compare numbers. To see yours, ask for your free estimate.

Can I clean, sand and seal my pavers?

A contractor does all three in order: wash, refill the joints, then seal a dry surface. Safe Touch warns that sealing over dirt or wet pavers is where jobs go wrong. Ask for the whole job in one written price, and ask for your free estimate.

Should you seal pavers after power washing?

Sealing is optional, though the joints need new sand once the pavers dry. A coat helps hold that sand through storms and makes pollen and algae easier to rinse later. The surface must be fully dry first. To plan both steps, ring (904) 474-3568.

Is it worth it to seal your pavers?

Often, for open sun and damp corners. Jax Exterior Cleaning, a Jacksonville company, says an unsealed surface breaks down until small white stones show and the sun fades the color, and a coat slows that. A shaded, little used path can wait longer. Compare the price with the published range, then ask for your free estimate.

Two contractors spraying and rolling sealer onto a brick herringbone driveway beneath live oaks

Get in touch today for a free estimate

Want your pavers looking cared for again? Send a quick request, and a reply arrives within 1 business day, usually much sooner.

Call (904) 474-3568

Free, no obligation